WMMS-4x12K-31B 4 Ton Quad Zone 48000 BTU Ductless Split Air Conditioner

4 Ton Quad-Zone Mini Split Air Conditioner: With a 48,000 BTU total Cooling Capacity, this Quad Zone ductless Mini Wall split system can cool 4 seperate 500 sq.ft zones for a total coverage area of 2000 sq.ft. Each 12,000 BTU zone has its own thermostat settings and control modes. Comes pre-charged with eco-friendly R-410A; Includes LCD remotes and complete installation kit with 25' [x4] of piping.

Home > Mini Split > Quad-Zone >

4 Ton Quad Zone Mini Split

855-382-8110

Home - About - SiteMap - Contact

Search BY BTU Capacity:

Portable AC's >
Mini Wall Splits >
Ceiling Cassettes >
Suspended Ceiling >
Central AC's >
Window AC's >
Air Coolers >
Space Heaters >

Ionizers >
HEPA >
UV/Tion >
Supplies >
Humidity Control: Humidifiers, Dehumidifiers

Humidifiers >
Dehumidifiers >

System Includes:

48,000 BTU's Cooling Capacity - 12000 x 4

Quad-Zone Setup: Air Handler x 4

Outdoor Unit - Compressor

Digital Multi-function LCD Remote Control x 4

Installation Kits (connection wire, piping etc) x 4

4 TON Quad-Zone Air Conditioner (12k x 4)

Price:	$

Backordered: ETA - 08.26-2010

Top Line Features:

Tri Air Handlers for Multi-Zone Placement

4 Tons of Cooling Capacity

Intelligent Mechanical Defrosting

Washable Filters - Biologically Actv Enzyme

Pre-Charged with freon for up to 25' of piping

Sleep Mode - 24 hour ON/OFF Timer - Memories

Enhanced Copper Coil - Wide Angle Air Spread

Over Current and Thermal Protection

Flexible, Quick Installation - Easy Operation

DIGITAL LED DISPLAY:
With its integrated INTELLIGENT CONTROL system you can choose from a variety of functions and settings. The digital LED information display center of the indoor unit provides real-time information relative to the operation of the unit, and the environment.

LCD Remote Control:
Settings are conveniently controlled with a LCD Digital Remote Control. Includes 4 remotes per system for quad-zone temperature settings. Additional remotes can be included for $25 each. (add to total upon checkout or contact us for details: sales@thermospace.com)

High Efficiency and Environmentally Friendly:
The R410A refrigerant enables high efficiency of the unit while preserving the ozone layer. This is another testament to our dedication to environmentally friendly products.

Multi-Folds Evaporator:
Enlarges the heat dissipation surface area; enhancing the efficiency and making the unit more compact in size.

Three Dimensional Swinging Pattern Air Delivery Technology:
Multidimensional wind-outlet and the dual swinging louvers will uniformly spread the cool air to reach every corner of room.

Good Sleep Mode Operation:
With the touch of a button, your ductless split air conditioner is set to automatically adjust the room temperature during your sleep.

Superior Inner-Grooved Copper Tubing:
Enables a much faster refrigerant flow, increasing the heat exchange efficiency by 30-50% over the traditional smooth copper tubing.

Integrated Dual Particle Filter (Washable):
Anti-mold dust/particle filters under the front panel cover provide for fresher air circulation. They are removable and washable.

Saw Tooth Fan Wheel Design for Noise Reduction:
The latest design adopts the air flow blades in the shape of saw teeth, which greatly reduces the vibration noises at the end of the vortex, ensuring a quiet operation of the unit.

System Specifications:

Cooling Capacities: (BTU's)	12,000 x 4 (48,000)
SEER: (Energy Efficiency)	13.0
Timer Settings:	1-24 Hours
Airflow:	365 cfm [x 4]
Moisture Removal: (Pints / Hour)	4.6 [x 4]
Thermostat:	61° F – 88° F
Fan Speeds: (3)	LO - MED - HI
Inside Noise Output:	41 dB(A)
Outside Noise Output:	53-55 dB(A)
Zones: (Air Handlers)	FOUR
Compressor Brand:	Sanyo
Compressor Type:	Rotary
Refrigerant:	R-410A
Indoor (air handler) Dimensions:	36" W x 8" D x 11" H
Indoor (air handler) Weights:	24 lbs. / each
Outdoor (condenser) Dimensions:	37" W x 17" D x 49" H
Outdoor (condenser) Weight:	268 lbs.

Electrical Info:

Power Supply (VAC):	230 / 208 - 60Hz
Total Current:	31.6 Amps [7.9 x 4]
MCA:	34 Amps
MOP: (breaker size)	40 Amps
Compressor RLA:	23.6 Amps
Compressor LRA:	116 Amps

Piping - Install Kit Info:

Tubing / Piping Included:	100 Feet (25 ft. x 4)
Ref. Pipe Size (liquid - gas):	1/4" - 1/2" [x 4]
Drain Pipe Size (ID / OD):	1/2" - 3/4"
Max Pipe Lengths:	50 ft. / each
Max Lift / Drop:	25 ft.

Click to View Full Spec Sheet >

Install Kit Contents:

25 Feet Flared Insulated Copper Tubing x 4

25 Feet Pipe Insulation x 4

Drain Pipe (outdoor)

Wall Cross piping

Defrost Wire

Putty to seal piping / holes

Wire Harness Between Indoor & Outdoor x 4

Remote Control w/ Wall Brackets & Batteries x 4

Wire Harness Outside Unit to Circuit Breaker

BASIC OVERVIEW: The indoor unit is hung like a picture frame approximately 6 - 8 feet above the floor usually on an exterior wall. A 2-3 inch hole must be made behind the indoor unit in the exterior wall to run the refrigerant copper tubing, electrical wires and the condensate drain to the outside unit. The indoor unit and outdoor unit are connected to each other by means of refrigerant copper tubing and electrical cables. The condensing unit comes pre-charged with Freon however, the lines still need to be vacuumed to evacuate the excess Nitrogen prior to the final coupling for operation. Click to Download Installation Manual. *Although the installation may seem easy to some, certain tools and experience is necessary to complete installation of a mini split* See Installation Tip. A certified HVAC technician must conduct / complete the installation to be eligible for the warranty. (See warranty details below > )

*5 Year Compressor - 1 Year on all other Parts* Registration card will be sent with unit, this card should be completed by an HVAC technician (installer). Installation of a mini split must be completed by a licensed HVAC (Heating, ventilating, & air conditioning) company to ensure any issues encountered in the future are not due to improper installation / workmanship. Even though mini split setup is below the expertise requirements of central AC systems, these are not "plug-n-play" units that can be properly installed without certain tools any prior HVAC - electrical knowledge. The installation includes electrical, gas, and refrigerant connections and generally regulated by a multiple sets of laws, codes and guidelines, at the federal, state and local levels. The failure to properly install HVAC equipment can raise personal safety and performance concerns. Warranty service - troubleshooting is provided through the contractor / installer and will be upheld as long as policies are observed. Once a non-defective unit is installed by a HVAC company, chances of anything going wrong are very slim and almost all contractors will guarantee there workmanship and provide future service free of charge (installation warranty). If it was determined that the unit is not functioning due to a defect and needs to be replaced, the part will be sent free of charge up to 1 year from date of purchase or 5 years for the compressor. If you receive a damaged or defective product, a replacement unit will be sent out Free of cost. Damaged / Defective product will be picked up and brand new exchange will be shipped out. Download Manual - Warranty Polices >

These Mini Split units usually ship via SAIA Motor Freight (on truck) or some other freight service. These units ship out of Missouri and are in transit with 2 business days from payment receipt. Depending on where you are geographically located, transit time is usually between 3 and 6 business days. Please provide a contact phone# upon checkout where recipient of order can be reached. SOMEBODY MUST BE ON SITE TO ACCEPT / SIGN FOR Order. Only ships to the lower 48 Contiguous United States.