|
|
|
Cooling Capacity:
Room Size:
Thermostat Range:
Dimensions:
Weight:
|
|
10,000 BTU
300 Square Feet.
62° F - 90° F.
30" H x 15" W x 16" D
77 lbs. |
|
|
|
|
|
 |
| Cooling rooms up to 300 sq. feet, this 10,000 BTU Portable Air Conditioner comes fully equipped with all the installation accessories, a Digital Display and Remote Control. The WA-1010E also utilizes a carbon filter system to clean pollutants from the air while removing excess moisture with a dehumidifier function. |
|
|
|
|
|
 |
1 Year Factory Warranty On Parts, Labor & Compressor.
Evaporative Technology: Moisture Expells Through Exhaust!
Restart IC - Automatic Restart on Power Failure.
Choice Of Programmable Timer Or Continuous Operation.
Dual Activated Carbon Filter Helps In Removing Odors.
Easy Grip Handle and Large Casters For Easy Mobility.
Cools, Dehumidifies, Improves Circulation & Filters Air.
Includes Exhaust Hose, Remote & all Installation Accessories. |
|
|
|
|
|
|
 |
| Power Supply: |
120 VAC |
| Freqency: |
60hz |
| Energy Efficiency
(EER): |
11.45 |
| Power Consumption: |
873 Watts |
| Amperage: |
8.15 Amps |
|
|
|
|
 |
| Exhaust pipe length: |
5 feet |
| Exhaust pipe diameter: |
5 inches |
| Window Kit Material: |
Foam |
| Window Kit Length: |
Max: 48 in. |
|
|
|
|
|
 |
| Timer: |
1~12 hours |
| Water Tank Capacity: |
3.2 Pints. |
| Moisture Removal: |
38 Pints / Day |
| Air Volume: |
470 m3/h |
| Cooling Operating
Temp: |
62° F - 110° F |
| Compressor Type: |
Rotary |
| Refrigerant / load: |
R-22 / 18.3 oz. |
| Noise Level (dba): |
54 |
|
|
|
|
 |
- Built-In Water Tank Allows For Usage Anywhere.
- Extended Water Tube For Continuous Drainage.
- Washable Air Filter Collects Dust Particles.
- 2 Fan Speed Settings.
- Dehumidifies / Removes Moisture From Air.
- Fire Resistant PVC Plastic Housing.
- Restart IC - Auto Restarts After a Power Failure)
- Uses A UL Required LCDI Plug.
- Self-Evaporating Technology. (see below)
- Digital Thermostat With Remote.
- Time Setting: 1- 12 Hours. |
|
|
|
|
|
| |
Self-Evaporating Technology
During the cooling process, water is extracted from the air into the unit. Most of this water is recycled and used to cool the cooling coils. This creates improved cooling efficiently without adding energy cost. The moisture is then pushed out with the exhaust air, leaving you a virtually no-drain unit. In extreme humid conditions, if condensation collects faster than the unit can evaporate, the excess water will collect in the built-in tank. When the tank becomes full, compressor will automatically shut-off and unit will indicate that drainage is needed. |
|
|
|
|
|
