21 SEER: 5 Ton Quint-Zone Ductless Mini Split AC - Heat Pump:  With a 63000 BTU total Cooling / HEATING Capacity, this Quad Zone INVERTER mini split air conditioner can cool 5 separate zones (9000 + 9000 + 9000 + 18000 + 18000 BTU) for a total coverage area of 2750 ft² (350 + 350 + 350 + 850 + 850 ft² areas). 21 SEERcooupled with Advanced Inverter technology provides the benefits of low operation temps, rapid cooling / heating as well as maximum energy efficiency.

Home > Mini Split > Quint-Zone >

5 Ton Mini Split AC Heater

Air Conditioners - Split AC's, Portable AC's, Air Cooler Source
407-965-2133
Mini Split Air Conditioners
Search BY BTU Capacity:
   
 
Inverter Systems
Single-Zone
Dual-Zone
Tri-Zone
Quad-Zone
Quint-Zone (5)
Energy Star
Temperature Control: Portable A/C's, Window A/C's, Air Coolers, Ductless Splits,
Portable AC's >
Mini Wall Splits >
Ceiling Cassettes >
Suspended Ceiling >
Central AC's >
Window AC's >
Air Coolers >
Space Heaters >
Air Purification: IONIZERS, HEPA Filters, UV-TION
Ionizers >
HEPA >
UV/Tion >
Supplies >
Humidity Control: Humidifiers, Dehumidifiers
Humidifiers >
Dehumidifiers >
 
Accessories
6000 BTU Mini Split
system
Indoor Unit Remote Control Outdoor Unit Installation Kit
 System Includes:
  • 63000 BTU Cooling / Heat  - 9k x 3 + 18k x 2
  • Quint-Zone Setup: Air Handler x 5
  • 63000 BTU Outdoor Unit - Compressor
  • Digital Multi-function LCD Remote Control x 5
  • Installation Kits (electrical wire, piping etc) x 5
  • Product & Installation Manuals
  •  

    5 TON Quint-Zone AC (9K + 9k + 9k + 18K + 18K)

    Price: $4424.95   Free Shipping  
    Features back to the top
    mini split features
    Top Line Features:
  • Quint (5) Air Handlers for Multi-Zone Placement
  • INVERTER DC TECHNOLOGY:  21 SEER
  • Intelligent Mechanical Defrosting
  • Washable Filters - Biologically Actv Enzyme
  • Low Startup Temps - MAXIMUM EFFICIENCY
  • Pre-charged with freon for 25' [x5] of piping
  • Sleep Mode - 24 hour ON/OFF Timer - Memories
  • Enhanced Copper Coil - Wide Angle Air Spread
  • Over Current and Thermal Protection
  • Flexible, Quick Installation - Easy Operation
  • Multi-Folds Evaporator   Cooling & Heating Variable Settings:  
    Each Indoor has variable settings for example one indoor unit can be set at 72 degrees in a office and the other can be set at 74 degrees in a sun room.
    Multi-Folds Evaporator   LCD Remote Control:
    Settings are conveniently controlled with a LCD Digital Remote Control.  Includes 3 remotes per system for quad-zone temperature settings.  Additional remotes can be included for $25 each.  (add to total upon checkout or contact us for details: sales@thermospace.com)
    High Efficiency and Environmentally Friendly   High Efficiency and Environmentally Friendly:
    The R410A refrigerant enables high efficiency of the unit while preserving the ozone layer. This is another testament to our dedication to environmentally friendly products. Condenser is Precharged for up to 25' of lining (per zone)
    Multi-Folds Evaporator   Multi-Folds Evaporator:  
    Enlarges the heat dissipation surface area; enhancing the efficiency and making the unit more compact in size.
    Three Dimensional Swinging Pattern Air Delivery Technology   Three Dimensional Swinging Pattern Air Delivery Technology:
    Multidimensional wind-outlet and the dual swinging louvers will uniformly spread the cool air to reach every corner of room.
    Good Sleep Mode Operation   Good Sleep Mode Operation:  
    With the touch of a button, your ductless split air conditioner is set to automatically adjust the room temperature during your sleep.
    Superior Inner-Grooved Copper Tubing   Superior Inner-Grooved Copper Tubing:  
    Enables a much faster refrigerant flow, increasing the heat exchange efficiency by 30-50% over the traditional smooth copper tubing.
    Integrated Dual Particle Filter   Integrated Dual Particle Filter (Washable): 
    Anti-mold dust/particle filters under the front panel cover provide for fresher air circulation. They are removable and washable.
    Saw Tooth Fan Wheel Design for Noise Reduction   Saw Tooth Fan Wheel Design for Noise Reduction:  
    The latest design adopts the air flow blades in the shape of saw teeth, which greatly reduces the vibration noises at the end of the vortex, ensuring a quiet operation of the unit.
    Specifications back to the top
    9000 BTU Indoor Air Handler Specs: CLICK TO ENLARGE
    WMMS-12EW-V2B


    18000 BTU Indoor Air Handler Specs: CLICK TO ENLARGE
    WMMS-12EW-V2B
    spacer Outdoor Compressor Unit Specs: CLICK TO ENLARGE
    WMMS-60CH-V2B
    Pipe reducer
    piping
    21 SEER ETL LISTED SANYO Compressor Cooling & Heating R410A refrigerant
    Install Kit back to the top
     Install Kit Contents:
  • 25 Feet Flared Insulated Copper Tubing x 5
  • 25 Feet Pipe Insulation x 5
  • Drain Pipe (outdoor)
  • Mounting Brackets for Indoor Unit
  • Putty to seal piping / holes
  •   Includes Install Kit
  • Wire Harness Between Indoor & Outdoor x 5
  • Remote Control w/ Wall Brackets & Batteries x 5

  •   Install Kit
    Remote Controls back to the top
    inside  
    WHAT IS DC INVERTER?

    DC Inverter Air Conditioners are the ultimate cooling and heating technology of the HVAC field.  They are called "DC inverter" because the alternative current (AC) is converted to Direct Current (DC) then, direct current inverted back to Alternative current with desired frequency. As known, the current supplied through the wall outlet has fixed frequency which is 60 Hertz. Different frequencies supplied to the compressor will result different running speeds of the compressor.  YMGI Inverter control systems use Pulse Amplitude Modulation (PAM) that is the most advanced and energy efficient method of inverting the current.  DC Inverter air conditioners bear special compressors that their speed could be changed by increasing or decreasing the frequency of the supplied power.  Therefore, unlike conventional split Air Contioners/Heat Pumps which cycle between on and off repeatedly, the DC Inverter control system will monitor the room temperature and adjust the compressor speed automatically.

    Conventional compressors turn on and off to maintain the room temperature at desired level.  This will result compressor to draw tremendous energy each time it starts up. This will also reduce the life-span of the compressor and other components that are turning on and off.  Once a conventional system is running, it runs at its maximum speed, consuming the maximum amount of energy in order to produce the maximum of cooling or heating to maintain the desired temperature.  The system will then cycle between on and off in an effort to maintain this temperature. When a DC Inverter compressor initially starts up, it runs with a higher speed to bring the room temperature to desired level rapidly. Once the set temperature is reached, it slows down and adjust its capacity to counter the heat loss or heat gain of the building. By this way it will maintain a constant temperature.

    Inverter Split
     
    Installation Overview back to the top
    BASIC OVERVIEW:  The indoor unit is hung like a picture frame approximately 6 - 8 feet above the floor usually on an exterior wall.  A 2-3 inch hole must be made behind the indoor unit in the exterior wall to run the refrigerant copper tubing, electrical wires and the condensate drain to the outside unit. The indoor unit and outdoor unit are connected to each other by means of refrigerant copper tubing and electrical cables.  The condensing unit comes pre-charged with Freon however, the lines still need to be vacuumed to evacuate the excess Nitrogen prior to the final coupling for operation.  Click to Download Installation Manual. *Although the installation may seem easy to some, certain tools and experience is necessary to complete installation of a mini split*  See Installation Tip.  A certified HVAC technician must conduct / complete the installation to be eligible for the warranty.  (See warranty details below > ) Installation Kit
    Installation Diagram
    Dual Zone Pics
    Remote Controls back to the top
    *5 Year Compressor - 1 Year on all other Parts*  Registration card will be sent with unit, this card should be completed by an HVAC technician (installer).  Installation of a mini split must be completed by a licensed HVAC (Heating, ventilating, & air conditioning) company to ensure any issues encountered in the future are not due to improper installation / workmanship.  Even though mini split setup is below the expertise requirements of central AC systems, these are not "plug-n-play" units that can be properly installed without certain tools any prior HVAC - electrical knowledge.   The installation includes electrical, gas, and refrigerant connections and generally regulated by a multiple sets of laws, codes and guidelines, at the federal, state and local levels. The failure to properly install HVAC equipment can raise personal safety and performance concerns. Warranty service - troubleshooting is provided through the contractor / installer and will be upheld as long as policies are observed.  Once a non-defective unit is installed by a HVAC company, chances of anything going wrong are very slim and almost all contractors will guarantee there workmanship and provide future service free of charge (installation warranty).  If it was determined that the unit is not functioning due to a defect and needs to be replaced, the part will be sent free of charge up to 1 year from date of purchase or 5 years for the compressor. If you receive a damaged or defective product, a replacement unit will be sent out Free of cost.  Damaged / Defective product will be picked up and brand new exchange will be shipped out. Download Manual - Warranty Polices >
    Available Accessories back to the top

    These Mini Split units usually ship via SAIA Motor Freight (on truck) or some other freight service. These units ship out of Missouri and are in transit with 2 business days from payment receipt.  Depending on where you are geographically located, transit time is usually between 3 and 6 business days.  Please provide a contact phone# upon checkout where recipient of order can be reached.  SOMEBODY MUST BE ON SITE TO ACCEPT / SIGN FOR Order.  Only ships to the lower 48 Contiguous United States.

      Southeastern Freight
     
    Available Accessories back to the top
    Options
    Swap 1 - 9k Wall Mount for Cassette:  (+) $130 *
    Swap 1 - 12k Wall Mount for Cassett:  (+) $100
    Swap 1 - 18k Wall Mount for Cassette:  (+) $125
    Swap all 4 Wall Mounts for Cassettes:  (+) $445
    * No 9000 BTU cassettes - need to exchange for 12000 BTU
    Swap 1 - 9k Mount for Susp. Ceiling:  (+) $190
    Swap 1 - 12k Mount for Susp. Ceiling:  (+) $232
    Swap 1 - 18k Mount for Susp. Ceiling:  (+) $248
    Swap all Mounts for Susp. Ceiling:  (+) $902
    This unit
    *If alternate air handler types are preferred, request invoice with preferred options upon checkout or contact us.
     
    Customize your system to meet your requirements - see below table for available output options:
     
    Tri-Zone Setup
    12k + 18k + 24k
    18k + 18k + 18k
    12k + 24k + 24k
    9k + 24k + 24k
    18k + 18k + 24k
    18k + 24k + 24k
    Quad-Zone Setup
    9k + 12k + 12k + 24k 9k + 9k + 18k + 24k
    9k + 12k + 18k + 24k 9k + 12k + 18k + 18k
    9k + 18k + 18k + 18k 12k + 12k + 18k + 24k
    12k + 12k + 12k + 24k 12k + 12k + 18k + 24k
    9k + 9k + 24k + 24k  
    Quint-Zone Setup
    9K+9K+9K+9K+12K/18K/24K 9K+9K+9K+12K+12K/18K/24K
    9K+9K+12K+12K+12K/18K/24K 9K+12K+12K+12K+12K/18K
    12K+12K+12K+12K+12K/18K 09K+09K+12K+12K+18K
    09K+09K+12K+18K+18K 09K+12K+12K+18K+18K
    12K+12K+12K+18K+18K  
    This system available in multiple air handler (zone) capacity combinations to meet the requirements of any application.  Air handlers are available in 9k, 12k, 18k and 24k outputs. Be advised, for arrangements where combined output of all heads exceeds rated capacity of condenser (60000 BTU's) - the total output will not exceed 60000's when all air handlers are running at full capacity simultaneously.  However, overated zones will draw required capacity from other zones either running at lower settings or areas that have reached thermostat settings to obtain rated output.  For example, with a 12k-12k-12k-12k-18k configuration, the total output will be along the lines of 11k-11k-11k-11k-16k when all zones are running on high/full settings at the same time.  However, once a zone obtains set temperature and/or operates at a lower setting, the capacity will bleed off into zone that needs the extra push to obtain the 12k-12k-12k-12k-18k yield.
     
    *If alternate air handler types are preferred, request invoice with preferred options upon checkout or contact us.
    Line
    Quad Zone Mini Split Air Conditioner
    Call Thermospace at 407-965-2133
     
    View the Mini Split FAQ Page >
    View the Installation - Setup Diagram >
    View the Mini Split Overview Page >
    View the Mini Split Installation Tip >
    line
    View All Ductless Mini Split Systems >
    View Only Inverter DC Ductless Splits >
    View Energy Star Energy Star Qualified Mini Splits >
    View Ceiling Mounted Ductless Systems >
    GO TO SUPPLIES AND ACCESSORIES >
     
    9000 BTU | 12000 BTU | 18000 BTU | 24000 BTU | 30000 BTU | 36000 BTU | 48000 BTU | 60000 BTU
     
    Single Zone line Dual Zone line Tri Zone line Quad Zone   Quint Zone
     

    Verisigned Paypal accepted

    Home - Contact - About - Privacy Policy - FAQ - Site Map

     

    Copyright © 2003-2017 Thermospace Inc.

     


    128 Bit
    Number of Cart Items:  0 | Total:  $0.00
    View Cart   Checkout