Klimaire KSIL024-H219 24000 BTU Mini Ductless Split Air Conditioner

The 18 SEER: Klimaire KSIL024-H219 - 24000 BTU Inverter mini split AC with heater is a great cost efficient system for cooling or heating areas up to 1000 square feet. Like any A/C you need to know how many BTUs are needed for the area you're trying to cool - heat. A mini split air conditioner is very quiet and efficient, but it is more expensive than a window or portable system. Since they are ductless, the mini split avoid the energy losses associated with the ductwork of central forced systems

Home > Mini Splits > 2 Ton >

24000 BTU INVERTER SPLIT: KSIL

855-382-8110

Home - About - SiteMap - Contact

Search BY BTU Capacity:

Portable AC's >
Mini Wall Splits >
Ceiling Cassettes >
Suspended Ceiling >
Central AC's >
Window AC's >
Air Coolers >
Space Heaters >

Ionizers >
HEPA >
UV/Tion >
Supplies >
Humidity Control: Humidifiers, Dehumidifiers

Humidifiers >
Dehumidifiers >

System Includes:

Indoor Unit - Air Handler

Outdoor Unit - Compressor

Digital, Multi-function LCD Remote Control

Installation Kit + Product Manuals

INVERTER - 'Energy Star' - 18 SEER - 9.6 HSPF

24000 BTU Inverter Mini Split - Heat Pump
Price:	$

Top Line Features:

Maximum Efficiency: 18+ SEER / 9.6 HSPF - DC Inverter

Pre-Charged with Eco-friendly R-410a Refrigerant

Energy Star Approved

for Maximum Efficiency

24,000+ BTU's of Turbo Cooling and Heating

Low Operation Temperatures (< 5° F)

Saves labor cost: fast coupling pipe for R410A & Power

6 Air Filtration Options!!! CLICK TO VIEW DETAILS >

Restart IC: Restores Settings Following Power Outage

Automatic self-diagnosis system for easy maintenance

AUTO-CLEAN feature CLICK TO VIEW DETAILS >

Install Kit Contents:

16 Feet Flared Refrigeration Tubing
Installation Plate
8 Clip Ancors w/ Mounting Screws
Drain Elbow (outdoor)
Wall Cross pipe
Drain Seal
Remote w/ sleep timer
Remote Wall Bracket

WHAT IS DC INVERTER?

DC Inverter Air Conditioners are the ultimate cooling and heating technology of the HVAC field. They are called "DC inverter" because the alternative current (AC) is converted to Direct Current (DC) then, direct current inverted back to Alternative current with desired frequency. As known, the current supplied through the wall outlet has fixed frequency which is 60 Hertz. Different frequencies supplied to the compressor will result different running speeds of the compressor. Klimaire Inverter control systems use Pulse Amplitude Modulation (PAM) that is the most advanced and energy efficient method of inverting the current. DC Inverter air conditioners bear special compressors that their speed could be changed by increasing or decreasing the frequency of the supplied power. Therefore, unlike conventional split Air Conditioners/Heat Pumps which cycle between on and off repeatedly, the DC Inverter control system will monitor the room temperature and adjust the compressor speed automatically.

Conventional compressors turn on and off to maintain the room temperature at desired level. This will result compressor to draw tremendous energy each time it starts up. This will also reduce the life-span of the compressor and other components that are turning on and off. Once a conventional system is running, it runs at its maximum speed, consuming the maximum amount of energy in order to produce the maximum of cooling or heating to maintain the desired temperature. The system will then cycle between on and off in an effort to maintain this temperature. When a DC Inverter compressor initially starts up, it runs with a higher speed to bring the room temperature to desired level rapidly, Once the set temperature is reached, it slows down and adjust its capacity just to counter the heat loss or heat gain of the building. By this way it will maintain a constant temperature.

BASIC OVERVIEW: The indoor unit is hung like a picture frame approximately 6 - 8 feet above the floor usually on an exterior wall. A 2-3 inch hole must be made behind the indoor unit in the exterior wall to run the refrigerant copper tubing, electrical wires and the condensate drain to the outside unit. The indoor unit and outdoor unit are connected to each other by means of refrigerant copper tubing and electrical cables. The condensing unit comes pre-charged with R410A Freon however, the lines still need to be vacuumed to evacuate the excess Nitrogen prior to the final coupling for operation. *Although the installation may seem easy to some, certain tools and experience is necessary to complete installation of a mini split* See User Manual. It is highly advised a certified HVAC technician conduct / complete installation to be eligible for warranty. (See warranty details below > )

Click to Download Warranty Details: A mini split system must be installed by a licensed HVAC (Heating, ventilating, & air conditioning) company to ensure any issues encountered in the future are not due to improper installation / workmanship. Even though mini split setup is below the expertise requirements of central AC systems, these are not "plug-n-play" units that can be properly installed without certain tools any prior HVAC - electrical knowledge. The installation includes electrical, gas, and refrigerant connections and generally regulated by a multiple sets of laws, codes and guidelines, at the federal, state and local levels. The failure to properly install HVAC equipment can raise personal safety and performance concerns. Warranty service - troubleshooting is provided through the contractor / installer and will be upheld as long as policies within Warranty spreadsheet are observed. Once a non-defective unit is installed by a HVAC company, chances of anything going wrong are very slim and almost all contractors will guarantee there workmanship and provide future service free of charge (installation warranty). If it was determined that the unit is not functioning due to a defect and needs to be replaced, the part will be sent free of charge. If you receive a damaged or defective product, a replacement unit will be sent out Free of cost. Damaged/Defective product will be picked up and a brand new exchange will be shipped out.